Error Connecting to Active Fiber - OptiFiber Pro | Fluke Networks

Wissensdatenbank

KB-Startseite   >  Fasertest   >  OptiFiber Pro®

Error Connecting to Active Fiber - OptiFiber Pro

When OptiFiber Pro is connected to a fiber link which has active signal present, the following error is displayed:

 

Active Fiber Link Connection Error Message

 

OTDR and OLTS testing should be performed on dark fiber only (no active signal, no active components in the link under test).

If you are unsure, it may be prudent to connect an optical power meter to the link and get a reading prior to performing OTDR testing.

 

If you also have the CertiFiber Pro CFP-QUAD modules, you can Measure Optical Power on the link.

 

Verfasser: Fluke Networks

Erstellungsdatum: 03. August 2016

Letzte Änderung: 03. August 2016

 
 
 
 
Powered By OneLink