Tone Generator - DTX CableAnalyzer
| The tone generator on the tester and smart remote produces a standard 2 kHz tone for locating cables and jacks with a tone probe such as the Fluke Networks IntelliTone probe.
The tone probe detects the toners signal and makes a sound that gets louder as you get closer to the cable or jack transmitting the signal. The tone is generated on pair 1, 2. Hinweis The tone generator does not generate the IntelliTone signal. 1. Attach a twisted pair adapter to the tester or smart remote. 2. Connect the tester or smart remote to the cabling as shown below:
3. To turn on the testers toner press  . 4. To turn off the toner, press again. |
