Output power - DSP 4x00 CableAnalyzer | Fluke Networks


KB-Startseite   >  Kupfertest   >  DSP-4x00 CableAnalyzer™

Output power - DSP 4x00 CableAnalyzer

The DSP-4000 generates a low duty factor pulse train during cable measurements. Pulse amplitude is around 3V across the twisted pair conductors. Pulse width varies from 2nS to 240nS depending on measurement mode. Inter-unit communication pulses are at a higher level, around 5V across the twisted pairs.

In summary, you cannot damage Hubs / Switches/ NICs with the DSP-4x00 CableAnalyzer.

Verfasser: Fluke Networks

Erstellungsdatum: 13. Februar 2014

Letzte Änderung: 13. Februar 2014

Powered By OneLink