Startseite > Support > Wissensdatenbank

Setting the Time and Date - CableIQ

The time and date are stored with saved Autotests. The time setting uses a 24-hour clock, shown here: Autotest Time and Date
 
To set the time and date: 
 
  1. Turn the rotary switch to SETUP. 
     
  2. Press Down Keyto highlight Time / Date; then press Enter Keyor F1 Key.
     
  3. To select a field to edit, use to highlight the field; then press Enter Keyor . 
     
  4. Use Down KeyUp Keyto change the setting in the selected field; then press Enter Key .