Testing a cross over cable with the PentaScanner | Fluke Networks

Wissensdatenbank

KB-Startseite   >  Kupfertest   >  PentaScanner

Testing a cross over cable with the PentaScanner

The last PentaScanner left the factory back on 31. März 2004. We regret to say support ended 31. März 2008. It's replaced by the Versiv familly of testers.
  
Unfortunately, you cannot configure the Autotest to test either a cross over cable (swap cable) or a link with a cross over cable in it.
 
You can verify the Wiremap though.

Verfasser: Fluke Networks

Erstellungsdatum: 26. Februar 2014

Letzte Änderung: 26. Februar 2014

 
 
 
 
Powered By OneLink