Importing results from a Pentascanner into LinkWare | Fluke Networks

Wissensdatenbank

KB-Startseite   >  Kupfertest   >  PentaScanner

Importing results from a Pentascanner into LinkWare

This is only possible in LinkWare PC Version 6,2. Since the PentaScanner Serial Port is only 34.800 baud, you will need to go into LinkWare and Options > Serial Port and select Slow as the connection speed. You do not need to do anything on the PentaScanner. LinkWare should simply download the results.

If you do not have Version 5.0 code loaded into your PentaScanner + or Version 4,21 code loaded into your PentaScanner, you may have to use Scanlink Software.
 

Verfasser: Fluke Networks

Erstellungsdatum: 26. Februar 2014

Letzte Änderung: 26. Februar 2014

 
 
 
 
Powered By OneLink