Negotiation Details results - DTX-NSM | Fluke Networks

Wissensdatenbank

KB-Startseite   >  Kupfertest   >  DTX-Netzwerkservice-Modul

Negotiation Details results - DTX-NSM

The following is a brief overview of the Negotiation Details results screen: 
 
Speed reported by the device: 1000 MBit 

Verbindung: Full Duplex 

 MDI Crossover Status: (twisted pair only) 
               - MDI: The hub or switch compensated 
               - MDI-X: The DTX compensated 

Pin Reversal: When Yes is displayed for Pin Reversal, it indicates a reversed pair on the link, which means that Wires 1 and 2 are possibly crossed. You will need to run a wire map test on the link to check the wiring.
 
Supported Speeds: Of the switch or hub 
                - Half Duplex: 10/100 MBit 
                - Full Duplex: 10/100/1000 MBit 
  
                 

Verfasser: Fluke Networks

Erstellungsdatum: 20. Februar 2014

Letzte Änderung: 20. Februar 2014

 
 
 
 
Powered By OneLink