Registering your CertiFiber Pro
The first requirement to register a CertiFiber Pro (Versiv) is obtaining the latest version of LinkWare PC Cable Test Management Software. You can click here to download it. We recommend using the standalone installer version.
You will also need an account on www.flukenetworks.com - click here to create an account.
1. Once LinkWare PC is installed and your account has been created, you will need to verify that the software version on your Versiv main and remote unit are up-to-date.
2. From the HOME screen, tap TOOLS > Version Information. Make sure that the version shown matches the latest Versiv firmware download, available here.
3. If it does not match the latest firmware, click here to learn how to update your Versiv.
4. If you have never connected the main and remote units together, do that now ensuring the remote unit is powered on.
5. The main and remote can be connected either with multimode reference cords or singlemode reference cords, shown below. Doing this allows the Versiv main unit to capture and store your remote unit and module(s) serial numbers.
Connecting with Multimode Reference Cords
Oder
Connecting with Singlemode Reference Cords
6. Connect the Versiv to your PC via the supplied micro USB cable. (If this is the first time, allow the USB driver to install)
7. With LinkWare PC open, wait a few seconds for the Product Registration window to appear:
Registration Prompt Example
If it does not appear, click on Help > Product registration.
8. Click Sign in and Register and enter the email address and password for your www.flukenetworks.com account.
9. Sobald Sie angemeldet sind, sollte LinkWare die verbundenen Produkte automatisch registrieren. If you bought the Bundled Gold Support, there should be a fourth column stating your gold support is in process. At this point, you can disconnect the fiber reference cords.
Andere Module
If you have other modules that have been used with this Versiv main unit already, those serial numbers have already been logged into the internal memory of the main unit and will appear in the registration window above. The Versiv main unit tracks internally any modules or remote units it is connected to.
Was soll ich tun, wenn ich einen „Registrierungsdienst ist nicht verfügbar“ Fehler bekomme und die Registrierung nicht funktioniert?
Ihre Unternehmens-Firewalls blockieren möglicherweise den Kommunikationspfad von Ihrem PC zu unserem Registrierungsserver.
Erkundigen Sie sich bei Ihrer IT-Gruppe und bitten Sie sie, Ausnahmen für die unten aufgeführten Ports und Server zu einzurichten. Sobald das getan wurde, versuchen Sie die Registrierung erneut.
Other Registration Errors
If you have followed the steps above and still get an error message when attempting to register, please email the serial numbers and error message to: support@flukenetworks.com
