Verkabelungsfehler 10: Überspringen von Schritten bei der Faserinspektion

Während die intelligenten Menschen, die Verkabelungsanlagen installieren, testen und zertifizieren, sich der Bedeutung des Erreichens normengerechter Leistungsparameter und der Gewährleistung von Anwendungsunterstützung bewusst sind, können sogar die besten unter uns Fehler machen, die sich negativ auf das Endergebnis und die Kundenzufriedenheit auswirken.

Let’s take a look at the #10 Dumb Thing that smart people do when testing network cabling systems—skipping out on proper fiber inspection.

10. Dezember 2015

Is Your Network Ready for Office Work Environment?

Today’s office environments are changing drastically in regards to where and how people work. Gone are the days of segregated work areas for each employee with siloed spaces featuring strictly wired connections for a computer and a phone.

Companies today are striving for more open, harmonious work environments and taking advantage of new trends such as collaborative work spaces, BYOD and a combination of work-from-home policies and office hoteling—the practice of reserving work space when needed rather than assigning permanent spaces to employees.

3. Dezember 2015

How to Save 50% Time in bi-directional testing?

When it comes to Tier 2 testing using an OTDR, measuring the loss of specific events like connectors and splices, as well as overall link loss, depends on the direction in which the measurement is made.

25. November 2015

Is Your Network Cabling Ready for Next-Gen PoE?

IEEE 802.3bt continues to specify higher power levels to be delivered along cabling that was traditionally designed for purely data distribution, presenting exciting possibilities for the future, however PoE is only part of today’s bigger picture regarding how we are transmitting power.

19. November 2015

Testing Wide Band Multimode Fiber - WBMMF

Multimode fiber (MMF) dominates in local area networks and data centers. Electro-optic converters (e.g. transceivers) used for transmitting and receiving data are less expensive than those used for transmitting over single-mode fiber. Network capacity has increased over the years through the use of parallel transmission – using multiple fibers and multiple transceivers. As the need for capacity continues to increase, the use of multiple fibers and multiple transceivers needed for parallel transmission may increase network cost.

5. November 2015

test 2


29. Oktober 2015

blog test

dies ist ein test

29. Oktober 2015

Golden Rule of Fiber Inspection - Clean and Inspect Again

Contaminated connections remain the number one cause of fiber related problems and test failures in data centers, campus and other enterprise or telecom networking environments.

28. Oktober 2015

Standard Update: 25GBASE-T Joins the Party!

Since the development of 40GBASE-T (IEEE 802.3bq) began a few years ago, most of us believed that the next Ethernet data center speed for twisted-pair copper cabling beyond 10 Gb/s would be 40 Gb/s.

22. Oktober 2015